Tag Archive | "patio-pattern stone (wet-laid)"
Garden Pavilion Construction Begins – RB Project #8.7
In the last post for this project we saw the sonotube footings beneath the four corners of the concrete slab. When the decorative stone & brickwork is complete, each footing will secure and support a pavilion column. Within the 12″ wide bluestone border is a row of brick to visually tie-in the surrounding brick patio. The [...]
Continue reading...Preparation For The Pavilion – RB Project #8.6
Tuesday, November 10, 2009
It Starts With The Footings The homeowners wanted a garden structure that would echo the style of their home and offer cover for those wanting to get out of the sun. I suggested they consider the Heritage Pavilion by Dalton Pavilions. They chose a 14 X 18′ model, but with single columns on the corners. The 3 [...]
Continue reading...Masonry Stone Steps Improve Access – RB Project #3.5
Thursday, September 20, 2007
This before & after look of RB Project #3 offers yet another perspective of this home’s patio area transformation. The existing R.R tie steps were used by the family everyday to get from the nearby detached garage and driveway to the back door. The homeowner asked during the design phase if the new steps and [...]
Continue reading...A Parking Space For Your Barbeque
Sunday, August 5, 2007
If you have a ground level patio, you don’t have to take up valuable space on the patio to accomodate the barbeque. Here we used a 2X3′ piece of bluestone (1.5″ thick). We dug down approximately 6″ deep in the area where the barbeque would sit and the remaining earth was compacted with a [...]
Continue reading...
© 2007 LandscapeAdvisor. Powered by Wordpress.
Friday, November 20, 2009
1 Comment